High Pressure Low Noise Replace Vickers V Vq V10 V20 V20f Hydraulic Vane Pump Price

• Customization: Available
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Model NO.: V Series Single Pumps
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump
• Model No: 20V/25V/35V/45V
• Type: Vane Pump
• Acting Form: Single-Acting
• Displacement: Quantitative Pump
• Nominal Displacement(Ml/R): 2-75
• Mounting Type: Flange Mounting
• Allowed Driving Speed(R /Min): 1800(1200)-600
• Shaft Extension: Major Shaft Standard or Minor Shaft
• Direction of Rotation: Right Rotation Standard or Left Rotation
• Inlet Position: Upper(Standard)/Bottom/Right/Left
• Transport Package: Sale Packing Contians Carton or Wood Case
• Specification: CE
• Trademark: Blince
• Origin: Guangdong Province, China (Mainland)
• HS Code: 8412291000
• Production Capacity: 1000 Units Per/Month

Product Description

                 
         High pressure low noise Vickers V VQ V10 V20 V20F hydraulic vane pump 

These series of composition vane in high performance are developed for industrial application can be applied properly in the hydraulic system of plastic injection machinery,rubber machinery,casting machinery,machine tools industry,etc.

The main feature:
1.The designing structure of composition vanes reduces its impact on the stator,so the pump will have further stability and longer lifetime while working with high pressure and high speed.
2.The designing structure of composition vanes itself reduce the noise .The design of 12 vanes makes smaller plow pulsation and lower noise.
3.Multi-displacement option and the cartridge structure of pump core make flexible application and easy maintenance. 


Blince can provide vane pump cartridge kits for original Eaton Vickers Series vane pumps are:
V10 - 1, 2, 3, 4, 5, 6, 7gpm
V20 - 6, 7, 8, 9, 10, 11, 12, 13gpm
V2010 & V2020 Front Cartridge Kits
VTM42 - 1, 1.5, 2, 4, 5, 6gpm
20V/VQ - 5, 8, 9, 11, 12, 14gpm
25V/VQ - 12, 14, 17, 19, 21gpm
35V/VQ - 21, 25, 30, 35, 38gpm
45V/VQ - 42, 47, 50, 57, 60gpm

Model descriptions
Front marks	Code of series	Displacement codes	Pump port connection	Mounting type	Shaft extension	Outlet position	Direction of rotation
No mark: water-in oil emulsion of petroleum series F3: Sul phosuccinic ester fatty of acid	20V	2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14	A-SAE 4 Bolted flange	No mark-flange mounting F-foot mounting	1-Straight shaft with key  151-Spline shaft	(Viewed from the cover end of the pump)  A: The opposite of inlet B: Counterclockwise 90° of pump port C: The same side of pump inlet port D: Clockwise 90° of pump inlet port	(Viewed from the shaft end of the pump)  L-counterclockwise rotation  R-clockwise rotation
	25V	10, 12, 14, 15, 17, 19, 21			1-Straight shaft with key 86-Heavy-duty straight shaft with key 11-Spline shaft
	35V	21, 25, 30, 32, 35, 38, 45
	45V	42, 45, 50, 57, 60, 66, 75
If you have any questions, please contact our customer service. During the purchase process, we can meet all your needs.  For hydraulic equipment, please look for Blince!

 

Operation and Maintenance

Hydraulic oil
It is recommended to adopt anti-wear hydraulic fluids with viscosity of32cst-68cst under the temperature of 40ºC, or automobile crankcase oil with alphabetic marks of SC, SD, SE or SF. The recommended viscosity under ratedrotation speed and rated pressure should range from 13cst to 54cst with the temperature range of 49ºC to 65ºC.

Cold start
In the case of adopting SAE 10W type hydraulic oil with viscosity between 860cst and 54cst, the operating rotation speed and pressure shall be limited within 50% of rated rotation speed and rated pressure respectively, until the system warms up. Particular attention should be paid to make sure that the whole system including the cylinder and motor on the far away side shall be all warmed up, when the pump starts up with the hydraulic oil viscosity exceeding 860cst.

High temperature operation
While working under high temperature, the viscosity shall not be less than 134cst, and the temperature shall not exceed 99ºC. Otherwise, the service lifetime of pump core components and sealing parts will be reduced.

Noise data
The average conditions for noise value testing of series of pumps:
1. Test with rotation speed of 1500r/min in mute laboratory.
2. Anti-wear hydraulic oil with the viscosity of 30cst.
3. The testing temperature of hydraulic oil ranges from 45ºC to 50ºC.
4. The distance between the noise sampling site alnd the back side of pump shall be one meter away.

Factory  Workshop /Production Line

COMPANY PROFILE
Dongguan Blince Machinery & Electronics Co., Ltd
specializing in design,manufacturing and sales of hydraulic product include hydraulic orbital motor,radial piston motor,hydraulic pump,hydraulic steering control unit,and oil cooler. Orbital motor from small OMM type to large torque OMS,OMT and OMV series.Vane pump include Yuken PV2R series, Vickers V10/20 V/VQ series and Tokemic SQP series. Denison T6 series.Radial piston motor like NHM1 to NHM31. We are located in Dongguan city which is an manufacturing city nearby Shenzhen port and Guangzhou port.It is very convenient for us to arrange shipment by sea..

For hydraulic equipment, please look for Blince!