Cast iron OMP36 hydraulic drive wheel motor
OMP series motor are small volume, economical type, which is designed with shaft distribution flow, which adapt the Gerotor gear set design and provide compact volume, high power and low weight.
Characteristic features:
*Advanced manufacturing devices for the Gerotor gear set, which provide
small volume,
high efficiency and
long life.
*Shaft seal can bear
high pressure of motor of which
can be used in parallel or in series.
*Advanced construction design,
high power and
low weight.
Flange:
1)Flange2: 2-Ø 13.5 Rhomb-flange, pilot Ø 82.5× 8
2)Flange4: 4-Ø 13.5 Rhomb-flange, pilot Ø 82.5× 8
3)FlangeH4: 4-3/8-16 Square-flange, pilot Ø 44.4× 2.8
4)FlangeH5: 4-M10 Square-flange, pilot Ø 44.4× 2.8
Shaft:
1)ShaftA: Shaft Ø 25, parallel key 8X7X32
2)ShaftC: Shaft Ø 25.4, parallel key 6.35X6.35X31.75
3)ShaftE: Shaft Ø 25.4, splined tooth SEA 6B
4)ShaftR: Short shaft Ø 25.4, parallel key6.35X6.35X31.75
5)ShaftB: Shaft Ø 32, parallel key 10X8X45
6)ShaftF: Shaft Ø 31.75, splined tooth 14-DP12/24
7)ShaftFD: Long shaft Ø 31.75, splined tooth14-DP12/24
8)ShaftG: Shaft Ø 31.75, parallel key 7.96X7.96X31.75
9)ShaftT: Cone shaft Ø 28.56, parallel key B5X5X14
10)ShaftT3: Cone shaft Ø 31.75, parallel key 7.96X7.96X25.4
Drain port:
1)D: G1/2 Manifold Mount 4× M8, G1/4
2)M: M22× 1.5 Manifold Mount 4× M8, M14× 1.5
3)S: 7/8-14 O-ring manifold 4X5/16-18UNC, 7/16-20UNF
4)P: 1/2-14 NPTF Manifold 4X5/16-18UNC, 7/16-20UNF
5)R: PT(RC)1/2 Manifold 4xM8, PT(RC)1/4
Application:
Injection molding machine
sweeping machine
harvester
turret, etc.
Contact:
Winnie Tan
Tel or whatspp:+8613558032097
Hope you have a happy life!!
Audited Supplier 
){kind=link}