Hydraulic vane pump is high pressure and high performance pump, it is are widely used for plastic machinery, casting machinery, metal machinery, pressing machinery, refining machinery, construction machinery, marine-Machinery.
We main supply these hydraulic pump:
Denison series T6C/T6D/T6E/T6CC/T6DC/T6EC/T6ED /T6DCC hydraulic vane pump and pump cartrdige kits.
Yuken series PV2R1 PV2R2 PV2R3 PV2R12 PV2R13 PV2R23 VANE PUMP.
Vickers series 20V/25V/35V/45V/2520V/3520V/3525V/4520V/4535V/4525V Single vane pump and double stage vane pump Vickers reries 20VQ/25VQ/35VQ/45VQ/2520VQ/3520VQ/3525VQ/4520VQ/4535VQ/4525VQ Single vane pump/double stage vane pump Tokimec series SQP1/SQP2/SQP3/SQP4/SQP21/SQP31/SQP41/SQP32/SQP42/SQP43 Single pump /double vane pump. Operation and Maintenance
Hydraulic oil It is recommended to adopt anti-wear hydraulic fluids with viscosity of32cst-68cst under the temperature of 40ºC, or automobile crankcase oil with alphabetic marks of SC, SD, SE or SF. The recommended viscosity under ratedrotation speed and rated pressure should range from 13cst to 54cst with the temperature range of 49ºC to 65ºC.
Cold start In the case of adopting SAE 10W type hydraulic oil with viscosity between 860cst and 54cst, the operating rotation speed and pressure shall be limited within 50% of rated rotation speed and rated pressure respectively, until the system warms up. Particular attention should be paid to make sure that the whole system including the cylinder and motor on the far away side shall be all warmed up, when the pump starts up with the hydraulic oil viscosity exceeding 860cst.
High temperature operation While working under high temperature, the viscosity shall not be less than 134cst, and the temperature shall not exceed 99ºC. Otherwise, the service lifetime of pump core components and sealing parts will be reduced.
Noise data The average conditions for noise value testing of series of pumps: 1. Test with rotation speed of 1500r/min in mute laboratory. 2. Anti-wear hydraulic oil with the viscosity of 30cst. 3. The testing temperature of hydraulic oil ranges from 45ºC to 50ºC. 4. The distance between the noise sampling site alnd the back side of pump shall be one meter away.
Factory Workshop /Production Line COMPANY PROFILE Dongguan Blince Machinery & Electronics Co., Ltd specializing in design,manufacturing and sales of hydraulic product include hydraulic orbital motor,radial piston motor,hydraulic pump,hydraulic steering control unit,and oil cooler. Orbital motor from small OMM type to large torque OMS,OMT and OMV series.Vane pump include Yuken PV2R series, Vickers V10/20 V/VQ series and Tokemic SQP series.Denison T6 series.Radial piston motor like NHM1 to NHM31. We are located in Dongguan city which is an manufacturing city nearby Shenzhen port and Guangzhou port.It is very convenient for us to arrange shipment by sea..
For hydraulic equipment, please look for Blince!
BLINCE HYDRAULIC MOTORS
Hydraulic motor-- Blince hydraulic motor Can perfect replace
Dan-foss :OMM/ OMP/ OMR/ OMH/ OMS/ OMT/ OMV/ DH/ DS series , TE/ TG/ TF series Eaton Char Lynn : J (129-), H(101-) ,S(103-),T(158-),2000(104-),6000 series orbit motor M+S : MM,MLHM/MP,MLHP/ MR,MLHR/ MH,MLHH/ MS,MLHS/ MT,MLHT/ MV,MLHV hydraulic motor. White : MP/RS/MR/RG/HB/CE/RE series hydraulic motor