Blince Compatible with Eaton Char-Lynn H Series 4 Bolt Std 46 Cm3/R [2.8 In3/R] Displacement Hydraulic Gerotor Motor Eaton H Series 101-1001-009

• Customization: Available
• Certification: CE, ISO9001
• Number of Poles: 2
• Structural: Hydraulic Orbit Motor
• Usage: Hydraulic Oil
• Flow Distribution: Axial Distribution Type
• Shaft Type: Parallel Key /Splined Key Shaft
• Flange Type: Square-Flange
• Diameter of Shaft: 25mm
• Standard & Non-Standard: Standard
• Hydraulic Motor: Piston Hydraulic Motor
• Hydraulic Actuator: Combination Hydraulic Cylinders
• Hydraulic Power Units: Vane Pump
• Transport Package: Plastic Tube +Carton+Wooden Pallets
• Specification: ISO9001
• Trademark: Blince
• Origin: Guangdong, China (Mainland)
• HS Code: 8412291000
• Production Capacity: 1000 Sets Per Month Meet Your Requirment

Product Description

About this item

• Part Name: Hydraulic Gerotor Motor 101-1001-009 101-1001
• Part Number: 101-1001-009 101-1001 1011001009 1011001 Note: Please check the fitment carefully before purchase. Or just tell us the part number you need.
• Product parameters: PRODUCT: MOTOR SERIES: H SERIES MOTOR DISPLACEMENT: 46 CM3/R [2.8 IN3/R] MOUNTING TYPE: 4 BOLT STD - 44.40 [1.748] DIA. X 3.05 [.120] PILOT, .375-16 UNC-2B MOUNTING HOLES ON 82.55 [3.250] DIA. B.C.(NO PILOT WITH EXTREME DUTY SEAL) OUTPUT SHAFT: 25.4 [1.00] DIA. STRAIGHT, WOODRUFF KEY, .250-20 UNC-2B HOLE IN SHAFT END PORT TYPE: .500-14 NPTF DRYSEAL PIPE THREAD PORTS
• Applicable Models: Compatible with Eaton Char-Lynn H Series
• Package included: 1PCS Hydraulic Gerotor Motor 101-1001-009 101-1001 1011001009 1011001

Product Description

 

Part Name: Hydraulic Gerotor Motor 101-1001-009 101-1001

Condition: New

Part Number: 101-1001-009 101-1001 1011001009 1011001

Note: Please check the fitment carefully before purchase. Or just tell us the part number you need.

Warranty: 6 Months

Fitment Type: Direct Replacement

Package included:

1PCS Hydraulic Gerotor Motor 101-1001-009 101-1001 1011001009 1011001

Applicable Models:

Compatible with Eaton Char-Lynn H Series

 

Product parameters:

PRODUCT: MOTOR

SERIES: H SERIES MOTOR

DISPLACEMENT: 46 CM3/R [2.8 IN3/R]

MOUNTING TYPE: 4 BOLT STD - 44.40 [1.748] DIA. X 3.05 [.120] PILOT, .375-16 UNC-2B MOUNTING HOLES ON 82.55 [3.250] DIA. B.C.(NO PILOT WITH EXTREME DUTY SEAL)

OUTPUT SHAFT: 25.4 [1.00] DIA. STRAIGHT, WOODRUFF KEY, .250-20 UNC-2B HOLE IN SHAFT END

PORT TYPE: .500-14 NPTF DRYSEAL PIPE THREAD PORTS

 

Note:

1. Please compare its appearance shape and size with your original unit and make sure that it can fit your machine before ordering.

2: Professional install will be highly recommend Installation instruction not included.

3. Please leave your physical address (home or office address) but do not leave your P.O. Box address and ensure that your address and contact information are correct.