Blince micro high speed Hydraulic motor OMM series
Orbital hydraulic motors MM and MMS are lightweight, small gerotor motors are designed for continiuous work in light conditions. The MM motors can transfer low power at relatively high rotational speed in comparsion with other motors with similar construction. They can reach maximum power up to 3.2 kW.
Rotational speed range: from 20rpm up to 1950 rpm; maximum continuous pressure: up to 105 bar.
Main Features:
1,Displacement: 8.2 - 50 cm3/rev;
2,Rotational speed range: 20 - 1950 rpm;
3,Maximum pressure: from 70/125 bar through 105/200 bar (continuous/peak);
4,Maximum power: 2.1 - 3.2 kW.
Main specification:
Displacement:
OMM8, OMM12.5, OMM20, OMM32, OMM40, OMM50
Flange:
1) 3-M6 Circle-flange, pilot Ø 31.5× 5;
2) 3-1/4-28UNF Circle flange, pilot Ø 31.5× 5;
3) 2-Ø 9 Rhomb-flange, pilot Ø 63× 2;
Shaft:
1) Shaft Ø 16, parallel key 5× 5× 16;
2) Shaft Ø 15.875, parallel key 4.8× 4.8× 19.05;
3) Shaft Ø 16.5, involute B17× 14, DIN5482;
Ports and drain port:
1) G3/8, G1/8;
2) 9/16-18UNF, 3/8-24UNF;
3) End port G3/8, G1/8;
4) End port 9/16-18UNF, 3/8-24UNF;
Application:
This OMM hydraulic motor is working high speed and low noise. very suitable for hydraulic hoof trimming crush. When machine work, hydraulic motor drives lifting belt and lifting the cow's two belly bands, front legs, back legs and elevator. Then workers could trimming hoof.
Packing details:
1) sale packing contians carton or wood case
2) interior packing is high quality film
3) as your request
Payment method:
1, Small amount accept Paypal,Western Union
2, Large orders We usually accept T/T(with 30% deposit, the balance before shipment)
My friends,
We also provide hydraulic motors such as OMM, OMP, OMR, OMS, OMT, OMV, OZ, OK, OM1, OM2, OM3, OM4, OMH, OMJ.
Vane pumps such as PV2R series, V series and VQ series, SQP series.
All these products are standard, best quality. If you are interested in any one of this products, don't hesitate to contact me.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}